Motor paso a paso NEMA 8 - 180g/cm Pololu 1204

Motor paso a paso Bipolar 20x30mm - 200 pasos, 3.9V, 600mA

RTELLIGENT Nema 17 Stepper Motor Bipolar Step Motor 1.8 Deg 68Ncm with Built-in 30cm Cable for 3D Printer CNC Router : Industrial & Scientific

Short Height. 16Ncm(22.6oz.in) holding torque. NEMA 17 bipolar 1.65x1.65x0.79 4-wire. 1.8 deg. step angle(200 steps/rev). Rated current 1.0A & resistance 3.5ohms. Make sure the motor connect to a constant current or chopper drive controller before you test motor. Connecting the motor directly to a power supply will destroy the motor.

STEPPERONLINE Short Body NEMA 17 Bipolar Stepper Motor 1A 18.4oz.in/13Ncm DIY

Motor PAP (Paso a Paso) Nema 17 1.22kg 17HS2408

This is one of the most popular stepper motor in Nema 17 size, it with 1.8deg step and size 42x42x40mm, It has 4 wires with 1m cable and 2.54mm pitch connector, each phase draws 2.0A, with holding torque 45Ncm(63.74oz.in). This stepper motor is ideal for the RepRap Prusa, Mendel 90, Rostock and similar 3D printers, as well as CNC and robotics applications. Nema 17 datasheet is as the below. Here is the updated version with a pluggable lead wire and smaller body.

STEPPERONLINE Stepper Motor NEMA 17 Bipolar 40mm 64oz.in(45Ncm) 2A 4 Lead 3D Printer Hobby CNC

This NEMA 17-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1.7 A at 2.8 V, allowing for a holding

Stepper Motor: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase

This mini nema 11 bipolar stepper motor with step angle 1.8deg and size 28x28x31mm. It has 4 wires, each phase draws 0.67A at 3.8V, with holding torque 7Ncm(9.91oz.in).

STEPPERONLINE NEMA 8 Bipolar Smallest Stepper Motor 1.6Ncm/2.3oz.in 1.8deg 28mm 0.2A 4 Leads

Pololu - Stepper Motors

This is one of the most popular stepper motor in Nema 17 size, it with 1.8deg step and size 42x42x40mm, It has 4 wires with 1m cable and 2.54mm pitch connector, each phase draws 2.0A, with holding torque 45Ncm(63.74oz.in). This stepper motor is ideal for the RepRap Prusa, Mendel 90, Rostock and similar 3D printers, as well as CNC and robotics applications. Nema 17 datasheet is as the below. Here is the updated version with a pluggable lead wire and smaller body.

STEPPERONLINE Stepper Motor NEMA 17 Bipolar 40mm 64oz.in(45Ncm) 2A 4 Lead 3D Printer Hobby CNC

Bipolar 200 Step- 20x30mm 3.9V - NEMA 8 Step Motor - pololu - 1204

Hollow-Shaft Motor – NEMA 8 – Stepper Motor